Art Business
How to Sign a Painting: Lower Right, Same Medium, Before Varnish
Sign a painting on the front, lower right, in the same medium you painted it with, before you varnish. Keep it small enough not to compete with the image but legible in a photo only 500 pixels wide, and put the title, year, medium, and dimensions on the back.
By Travis Moher · Published November 17, 2026
When a painting comes in to be appraised, consigned, or framed, the signature and the back of the canvas are the first two things we look at, because they are the first two things a buyer, an appraiser, or an insurer will look at later. A clear, consistent signature and a well documented back make a work easier to sell and easier to authenticate. A smeared signature over varnish, or a back with nothing on it, makes both harder.
The same medium rule
The working convention, stated plainly by illustrator and painter James Gurney, is to sign in the same medium and with the same kind of tool you used for the artwork. An oil gets an oil signature from a small brush. A watercolor gets watercolor or pencil. A print gets graphite in the margin. The signature then ages with the work, reads as part of it, and sits in the same paint layer a conservator will treat as original. That is the whole rule, and most signature problems come from breaking it.
Where to sign: lower right, and the exceptions
Lower right is the tradition and still the most common choice. Lower left is equally accepted. Gurney's test for placement is a spot that is not busy or central, near the edge or within the crop margin. In practice, leave room for the frame: a standard frame rabbet laps over the edge of the canvas, so a signature tucked right into the corner can disappear under the moulding. Check where the sight line of your usual frames will fall before you sign.
- •Busy corner. If the lower right is full of detail, sign lower left. Do not squeeze a signature into a passage where it fights the image.
- •Vertical diptychs and series. Sign the panel that hangs last in reading order, and mark every panel on the back so they can be reunited.
- •Gallery wrapped canvas. Some painters sign the side edge to keep the face clean. If you do, also sign the back, because a side signature is easy to miss in photos and paperwork.
- •Unsigned on purpose. Abstract and minimalist painters sometimes sign only the back. That is a legitimate choice, but then the back has to carry everything.
What to sign with, by medium
| Medium | Sign with | Where | When | Avoid |
|---|---|---|---|---|
| Oil | Oil paint, small liner or round brush | Front, lower right | Before varnish, ideally while the paint is still workable | Markers, gel pens, paint over varnish |
| Acrylic | Acrylic paint, liner brush | Front, lower right | Before any isolation coat and varnish | Paint markers over varnish |
| Watercolor and gouache | The same paint with a fine brush, or graphite pencil | Front, lower right, inside the area the mat will show | When the sheet is dry, before matting | Ballpoint, felt tip, ink that may bleed |
| Drawing (graphite, charcoal, pastel) | The drawing medium itself | Front, lower right | Before fixative, if you use one | Ink on a pencil drawing |
| Original print (etching, litho, screenprint) | Graphite pencil | Bottom margin: number lower left, title center, signature lower right | After the edition is printed and checked | Signing on the image, printed signatures sold as hand signed |
| Digital or inkjet print | Graphite pencil on matte paper; tested archival pigment pen where pencil will not take | Bottom margin, same layout as an original print | After the print has fully dried | Ballpoint, gel and ordinary marker pens |
| Sculpture and bronze | Incised in the model or wax, or engraved, so it is cast in | Base or underside, near the foundry mark | Before casting, so every cast carries it | Stick on labels as the only mark |
On size, Gurney gives the most useful single number we know of: the signature should be identifiable when the image is only 500 pixels across. That is roughly the size a painting appears in an online listing or an auction catalog thumbnail, which is where many buyers first see your work. For color, he notes that a dull red such as English red is traditional; any color works if it harmonizes with the painting and contrasts enough to read.
Front vs back: what goes where
The front carries the signature, and optionally the year. Everything else goes on the back. Gurney strongly recommends writing the title, date, location, and circumstances of creation on the back, and quotes a museum preparator on how much those notes help historians and conservators later. At minimum, record:
- •Your full name, even if the front carries initials.
- •Title and year. The exact year, not a decade.
- •Medium and support, for example oil on linen, acrylic on panel, watercolor on cotton paper.
- •Dimensions, height by width (by depth for thick panels), in inches and centimeters.
- •City or place painted, and an inventory number if you keep one.
Where you write matters as much as what. The Canadian Conservation Institute lists discouraging “writing on, the back of the canvas” as one of the functions of a backing board. Put the information on the stretcher bar, on a label fixed to the stretcher, or on a backing board, in soft pencil or a tested archival pen. Note that framing paper can later cover the back, as Gurney warns, so keep the same record in your own files and on the certificate of authenticity you issue at sale.
Free to use
Put this signing chart on your site
Run a print shop, an art supply store, or an artist blog? Copy the snippet below to embed the signing by medium chart on your own page. It is self contained and renders anywhere. The only ask is that you keep the small credit link back here.
Click inside the box, select all (⌘A or Ctrl+A), and copy.
Signing editions
Prints follow a stricter convention than paintings. A limited edition is normally hand signed and numbered by the artist, typically in pencil, in the bottom margin: the edition number at lower left as a fraction such as 14/100, the title (optional) at center, and the signature at lower right. The first number is that impression; the second is the total edition size. Proofs outside the edition get their own marks: A.P. for artist's proofs, P.P. for printer's proofs, H.C. (hors de commerce) for impressions not for sale, and B.A.T. for the approved reference impression.
For digital and inkjet prints, the same layout applies. Graphite works on matte fine art papers. On glossy or baryta surfaces where pencil will not take, use a pigment based archival pen and test it on a scrap of the same paper first. Our full guide to limited edition prints covers edition sizes, proofs, and what each mark does to value.
Sculpture editions have a written standard. The College Art Association says each cast should carry information as to date, foundry, and size of the edition, and that all posthumous casting must be clearly identified. Sign the base in the wax or model so the signature is cast into every example, and keep it distinct from the foundry mark.
Mistakes that hurt resale and authentication
- •Signing over varnish. Varnish is a removable top layer; Golden Artist Colors says varnishes should be removable to allow for cleaning without damaging the surface below. A signature painted on it can come off the first time the painting is cleaned. Painters using removable varnishes such as Gamvar report that the only clean fix for a forgotten signature is removing the varnish from the whole painting, signing, and revarnishing. See our note on how paintings are cleaned.
- •Marker or gel pen on the front. It sits on the surface, does not age like the paint, and its lightfastness is often unknown. If you would not paint with it, do not sign with it.
- •Changing your signature without a record. Signatures do evolve over a career. Keep dated photos of each version so an appraiser can match an early work to you.
- •Signing someone else's work, or a reproduction, as if it were original. A hand signature on a reproduction should be described as a signed reproduction. Selling it as an original print is the kind of misdescription that destroys trust in a body of work.
- •Nothing on the back. An unsigned, undated back turns a simple attribution into research for whoever handles the work next.
- •A signature that cannot be read. A flourish is fine. An illegible scrawl that changes every time is not, because consistency is what lets collectors and curators recognize your hand.
Frequently asked questions
Where should an artist sign a painting?
On the front, usually in the lower right corner, set in from the edge so the frame rabbet does not cover it. Lower left is equally accepted. James Gurney's advice is to pick a spot that is not busy or central, and to make the signature small enough not to draw attention but legible when the painting is photographed at only 500 pixels across.
What should I sign an oil painting with?
Oil paint and a small round or liner brush, while the paint around it is still workable or at least before you varnish. The convention of signing in the same medium you painted with means the signature ages with the painting and reads as part of it. Avoid markers and gel pens on the front of an oil.
Should I sign a painting before or after varnishing?
Before. A picture varnish is meant to be a removable, sacrificial top layer. A signature painted on top of it sits in the layer a conservator will eventually dissolve. Painters who use removable varnishes such as Gamvar report that adding a forgotten signature means removing the varnish from the whole painting, not just the corner, then signing and revarnishing.
What should I write on the back of a painting?
Title, year, medium and support (for example oil on linen), dimensions as height by width, your full name, and where it was painted. Write it on the stretcher bar or a backing board in pencil or a tested archival pen, not on the back of the canvas itself. The Canadian Conservation Institute lists discouraging writing on the back of the canvas as one of the jobs a backing board does.
How do you sign and number a limited edition print?
In pencil, in the bottom margin below the image: edition number at lower left as a fraction such as 14/100, title optional at center, signature at lower right. The first number is that impression, the second is the total edition. Artist's proofs are marked A.P., printer's proofs P.P., and not for sale impressions H.C.
How should I sign a sculpture?
On the base or underside, incised or cast in, with the year. For a bronze edition, the College Art Association's sculpture standards say each cast should carry the date, foundry, and edition size, and that posthumous casts must be clearly identified. The foundry mark and your signature are separate marks.
Should the signature include the year?
Yes. A year on the front or the back helps future curators and conservators date the work, and it is one of the first things an appraiser looks for. If you keep the front minimal, put the full date on the back with the title.
Can I sign a painting with initials only?
Yes, if you use them consistently. Collectors and appraisers recognize a body of work partly by the signature, so pick one form for finished works and keep it. Use the full name on the back so the initials can always be tied to you.
Ready to sell or insure the work you just signed? Start with our guides to pricing artwork and getting art appraised.
Sources
- James Gurney, How to Sign Your Artwork (placement, the same medium convention, the 500 pixel legibility test, and what to write on the back)
- Canadian Conservation Institute, CCI Notes 10/10, Backing Boards for Paintings on Canvas
- College Art Association, Standards for Sculptural Reproduction and Preservation
- Edition (printmaking), for the pencil numbering convention and the A.P., P.P., H.C. and B.A.T. marks
- Golden Artist Colors, Varnishing: An Introduction, on varnish as a removable, sacrificial layer
- M. Chesley Johnson, Removing Varnish, on removing Gamvar across the whole painting before adding a signature
Austin Gallery's notes are general guidance for working artists. For questions about a specific varnish or support, check the manufacturer's technical sheet or ask a paintings conservator.
Cite this guide
Writers, framers, designers and students are welcome to quote this page. If you use one number, use this one:
Sign a painting on the front, lower right, in the same medium you painted it with and before varnish, small enough not to compete but legible in a photo 500 pixels wide.
Suggested citation:
Austin Gallery, "How to Sign a Painting: Lower Right, Same Medium, Before Varnish," updated November 2026. https://www.austingallery.org/blog/how-to-sign-a-painting
More free charts: the Austin Gallery reference library.