Framing Reference
How to Frame a Jigsaw Puzzle: Sizes by Piece Count and Method
Seal the finished puzzle with puzzle glue or peel-and-stick saver sheets, mount it on foam board, then measure it before you buy a frame: a Ravensburger 1000-piece puzzle finishes at about 50 x 70 cm (19.7 x 27.6 in), a Buffalo Games 1000 at 19.75 x 26.75 in, and a White Mountain 1000 at 24 x 30 in. Box sizes can be off by about 1/4 inch.
By Travis Moher · Published November 17, 2026
A finished puzzle is a print on cardboard cut into a thousand pieces. Framing it uses the same logic as framing any print: hold it flat, keep it off the glass, protect it from light, and fit the frame to the object. The difference is that “1000 pieces” is not a size. Each maker cuts to its own format, which is why the most common puzzle framing mistake is buying the frame before measuring the puzzle.
Our measure-first rule: frame the puzzle, not the box
Measure the assembled puzzle edge to edge in both directions, and buy the frame to that number. Frame It Easy notes that listed puzzle dimensions can be off by about 1/4 inch, and Ravensburger itself says finished sizes vary in production with the moisture content of the cardboard and pressing pressure. Its FAQ puts a 1000-piece puzzle at 699 x 497 mm. That is our rule of thumb, and the table below is the starting point, not the final measurement.
| Puzzle | Finished size | Frame to look for |
|---|---|---|
| Ravensburger 500 | 36 x 49 cm (14.2 x 19.3 in) | Custom frame, or a larger frame with a custom-cut mat |
| Ravensburger 1000 | 50 x 70 cm (19.7 x 27.6 in) | 50 x 70 cm poster frame (19 3/4 x 27 1/2 in), no mat |
| Ravensburger 1500 | 60 x 80 cm (23.6 x 31.5 in) | 60 x 80 cm frame where sold, or custom |
| Ravensburger 2000 | 75 x 98 cm (29.5 x 38.6 in) | Custom frame; use acrylic to save weight |
| Buffalo Games 1000 | 19.75 x 26.75 in (50.2 x 67.9 cm) | Custom 19 3/4 x 26 3/4 in, or 50 x 70 cm with a mat |
| White Mountain 1000 | 24 x 30 in (61 x 76.2 cm) | 24 x 30 in opening, or custom |
Sizes: Ravensburger FAQ and Ravensburger size table (500 to 2000 pieces); Buffalo Games and White Mountain from retailer listings of their standard 1000-piece puzzles. Large-format, panorama and specialty puzzles differ. Inch conversions rounded.
The Ravensburger 1000 is the easy one. 50 x 70 cm is a standard European poster size, and ready-made frames are sold for it; IKEA's KNOPPÄNG, for example, takes a 50 x 70 cm (19 3/4 x 27 1/2 in) picture with no mat. Most other formats fall between standard US frame sizes, so they need a custom frame or a larger frame with a mat cut to the puzzle. Our standard picture frame sizes chart shows what is stocked off the shelf.
Glue, saver sheets, or no glue
There are three ways to hold the pieces together, and the right one depends on whether you ever want the puzzle back.
| Method | How it works | Tradeoff |
|---|---|---|
| Liquid puzzle glue | Brushed or sponged over the face, into the seams | Strongest bond; leaves a glossy coat; permanent; needs drying time |
| Peel-and-stick saver sheets | Adhesive sheets pressed onto the back, overlapping slightly | No mess or drying; face keeps its matte finish; permanent |
| No glue | Slid onto backing board and held flat under the glazing | Fully reversible; needs a snug frame and careful handling |
Liquid glue. Use a thin, even coat. Frame It Easy warns that too much can make the puzzle swell or curl, and suggests a second coat on the back if the edges lift once the front is dry. If you go this route, a purpose-made product like Mod Podge Puzzle Saver (about $8) dries clear.
Saver sheets. This is our pick for anything going behind glazing: the adhesive stays on the back, so the printed face looks the way it did on the table. Custom Picture Frames sells acid-free 7 x 10 in sheets and specifies up to 8 for a 1000-piece puzzle, about 4 for 500 and about 16 for 2000. The Buffalo Games Puzzle Saver (6 sheets and 2 hangers, about $7) is the common grocery-shelf version. Flip the puzzle face down by sliding it between two boards, not by lifting it. Our puzzle boards and mats guide covers boards that make the flip easier.
No glue. For a puzzle you may want to redo or resell, skip adhesive. Slide the assembled puzzle onto a backing board, set the frame face down over it (glazing in place), and close the back. The glazing and backing pressure keep the pieces in place. Keep it flat during handling, and do not choose this for a frame that will be moved often.
Mounting board and depth
Mount the sealed puzzle on foam board, cut just larger than the puzzle, and trim it flush or to the frame opening. Frame It Easy recommends foam board for support and points out the depth math most people skip: cardboard puzzles run about 1.2 to 1.9 mm (about 1/16 in), wooden puzzles can be about 1/4 in, a single mat adds about 1/8 in and a double mat 1/4 in or more. Add the backing and check it against the frame's rabbet depth. Ready-made frames vary; Frame It Easy's own hold up to 1/8 in (wood) or 1/4 in (metal) of art, so thick or wooden puzzles often need a deeper frame or a shadow box.
Mat or no mat
A mat is optional. Without one, the puzzle runs edge to edge and the frame should match the puzzle size exactly. With one, the puzzle reads as framed art and the mat keeps the glazing off the puzzle face. To size the frame for a mat, add twice the mat border to each dimension: a 50 x 70 cm puzzle with a 2.5 in (6.4 cm) border needs a frame opening about 5 in (12.7 cm) larger each way. The mat window should overlap the puzzle edge by about 1/4 in so the edge pieces are held, not floating.
For glazing, use UV-filtering acrylic on anything large. A 2000-piece puzzle at 75 x 98 cm is a lot of glass to hang. Puzzle prints fade like any print near a window; our guide to protecting art from fading explains the glazing options.
Free to use
Put this puzzle size chart on your site
Writing about puzzles, framing, or gifts? Embed our puzzle frame size chart for your readers. Copy the snippet below; it renders a clean table anywhere. The only ask: keep the small credit link to Austin Gallery.
Click inside the box, select all (Cmd-A or Ctrl-A), and copy. Includes one credit link back to this page.
Exceptions and distinctions
- •Same piece count, different size. A Ravensburger 1000 (about 19.7 x 27.6 in) and a White Mountain 1000 (24 x 30 in) need different frames. Never buy a frame labeled only “1000 pieces.”
- •Piece counts are nominal. Ravensburger's FAQ addresses why the actual number of pieces can differ from the count on the box. Size follows the cutting format, not the label.
- •Glue on the face changes the look. Front-applied glue leaves a sheen that can show glare under glass. If the matte print surface matters, use sheets on the back.
- •Wooden puzzles are a different object. At up to about 1/4 in thick, they rarely fit a standard frame and usually need a shadow box.
- •Glue is permanent. Once sealed, the puzzle cannot be taken apart and redone, and a glued puzzle is no longer complete for resale as a puzzle.
Still building your kit? Our puzzle accessories guide ranks the glues, sheets and sorting trays.
Frequently asked questions
What size frame do I need for a 1000-piece puzzle?
It depends on the brand, so measure the finished puzzle. A Ravensburger 1000-piece puzzle finishes at about 50 x 70 cm (19.7 x 27.6 in) and fits a 50 x 70 cm poster frame. Buffalo Games 1000-piece puzzles finish at 19.75 x 26.75 in, and White Mountain 1000-piece puzzles at 24 x 30 in. Box dimensions can be off by about 1/4 inch.
Do you have to glue a puzzle to frame it?
No. Glue or peel-and-stick saver sheets make the puzzle one rigid panel that is easy to move and hang, but a puzzle can also be framed unglued if it is slid onto a backing board and held flat under the glazing in a snug frame. Unglued framing keeps the puzzle reversible; glued framing is sturdier.
Is puzzle glue or puzzle saver sheets better for framing?
Liquid glue brushed on the front gives the strongest bond but leaves a glossy coat and needs drying time. Peel-and-stick sheets go on the back, keep the original matte finish and need no drying. One framer's sheets cover a 1000-piece puzzle with 8 sheets of 7 x 10 in. Behind glass, either works; sheets are the cleaner choice.
Should a framed puzzle have a mat?
A mat is optional. It adds a border that makes the puzzle look like framed art, and it keeps the glazing off the puzzle surface. A single mat adds about 1/8 inch of depth and a double mat 1/4 inch or more, so check that the frame is deep enough for puzzle, backing and mat together.
How thick is a jigsaw puzzle for framing?
Most cardboard puzzles are about 1.2 to 1.9 mm thick (roughly 1/16 inch); Ravensburger lists its pieces at 2.1 to 2.2 mm. Wooden puzzles can be about 1/4 inch. Add the backing board, any mat, and the glue or sheets before choosing a frame depth.
What do you mount a puzzle on before framing?
Foam board or another rigid backing a little larger than the puzzle. It supports the glued panel so it does not bow in the frame. For long display, use acid-free foam board so the backing does not yellow the puzzle over time.
Should I use glass or acrylic to frame a large puzzle?
For 1500 pieces and up, acrylic is the practical choice because it is far lighter than glass at 60 x 80 cm and larger. Choose a UV-filtering grade if the puzzle will hang anywhere near a window.
Sources
- Ravensburger: Puzzle FAQ (1000-piece dimensions, production variance, piece thickness)
- CEWE: Ravensburger jigsaw puzzle sizes (500 to 2000 pieces)
- Frame It Easy: How to frame a puzzle (thickness, mat depth, backing)
- Custom Picture Frames: Puzzle glue sheets (sheets per piece count)
- IKEA: KNOPPÄNG frame, 50 x 70 cm
- Retailer listings: Buffalo Games 1000-piece, White Mountain 1000-piece
Sizes are published manufacturer and retailer figures as of November 2026; specialty formats differ, so measure your puzzle. Austin Gallery may earn a commission from links on this page at no cost to you.
More gallery reference guides
Cite this guide
Writers, framers, designers and students are welcome to quote this page. If you use one number, use this one:
A Ravensburger 1000-piece puzzle finishes at about 50 x 70 cm (19.7 x 27.6 in), but Buffalo Games 1000-piece puzzles measure 19.75 x 26.75 in and White Mountain 1000-piece puzzles 24 x 30 in, so measure the puzzle before buying a frame.
Suggested citation:
Austin Gallery, "How to Frame a Jigsaw Puzzle: Sizes by Piece Count and Method," updated November 2026. https://www.austingallery.org/blog/how-to-frame-a-jigsaw-puzzle
More free charts: the Austin Gallery reference library.