Framing
How to Frame a Canvas Painting: Floater Depths, Gaps and Going Frameless
Frame a stretched canvas in a floater frame 1/8 to 1/4 inch deeper than the canvas (7/8 to 1 inch for a 3/4-inch canvas, 1 5/8 to 2 inches for a 1 1/2-inch gallery wrap), with an opening 1/4 to 1/2 inch larger than the canvas for the reveal, and no glass on oils or acrylics. To hang a canvas without a frame, screw two D-rings into the stretcher bars and hang them on two level hooks.
By Travis Moher · Published November 17, 2026
A canvas is not framed like a print. It has depth, it has no glass, and the edges are often part of the painting. That leaves three real options: a floater frame, a traditional frame with offset clips, or no frame at all. The first measurement for all three is the depth of the stretcher bars.
The deeper-frame rule
Our rule of thumb, matching framing trade guidance: the frame must be at least as deep as the canvas, ideally 1/8 to 1/4 inch deeper, so the canvas sits recessed and its back does not stick out. Custom Picture Frames notes that most canvases are either 0.75 inch (gallery-thin) or 1.5 inch (gallery-wrapped) deep, which makes the choice simple once you measure.
| Canvas depth | Floater frame depth | Traditional frame | Note |
|---|---|---|---|
| 3/4 in (1.9 cm), standard profile | 7/8 to 1 in (2.2 to 2.5 cm) | Works with offset clips | Most common student and decor canvas |
| 1 1/2 in (3.8 cm), gallery wrap | 1 5/8 to 2 in (4.1 to 5.1 cm) | Too deep for most; floater or bare | Painted edges are made to hang unframed |
| Canvas panel or board, about 1/8 in (3 mm) | Not needed | Fits a standard rabbet like a print | Frame with or without a mat |
Floater depths from Custom Picture Frames' floater and canvas framing guides. Not sure which size canvas you have? See our standard canvas sizes chart.
Floater frames and the reveal gap
A floater holds the canvas from behind. The painting sits on a ledge inside an L-shaped profile and is fixed with offset screws driven up through the frame into the stretcher bars, typically three per side, one near each corner and one in the middle. The gap between canvas and frame is the reveal. The same guide gives it as 1/8 to 1/2 inch, and sells oversized openings 1/4 to 1/2 inch larger than the canvas in each direction, which works out to 1/8 to 1/4 inch per side.
| Reveal per side | Order the opening | Look |
|---|---|---|
| Flush (no gap) | Same as canvas | Tight, modern edge |
| 1/8 in (3 mm) per side | Canvas + 1/4 in (6 mm) | Subtle shadow line |
| 1/4 in (6 mm) per side | Canvas + 1/2 in (13 mm) | The classic float |
Traditional frames and offset clips
A conventional moulding with a lip can frame a canvas too, and it suits older or traditional paintings. The catch is depth: a 3/4-inch stretcher is usually deeper than the rabbet, so the canvas stands proud of the back. Offset clips solve that. They are Z-shaped plates that screw to the back of the frame and step down onto the stretcher. A pack of assorted offset canvas clips with screws (about $10) covers the common offsets. The Canadian Conservation Institute is specific about fitting: screw the plates into the frame only, not into the stretcher, hold the painting securely but not too tightly, pad the rabbet, and never use nails.
No glass on oils and acrylics, with one exception
Oil and acrylic paintings on canvas are normally framed without glazing. Glass adds glare and hides surface texture, and Custom Picture Frames puts it plainly: canvas is meant to be viewed bare. The exception is a valuable painting in a risky spot, such as a busy hallway or a sunny room. Conservators do glaze those, and the rules are firm. CCI says glazing must not touch the paint surface and a spacer should hold it away. The Australian War Memorial notes framing allows glazing with anti-reflective, laminated glass or acrylic, with a spacer keeping acrylic off the painting. Our acrylic vs glass guide covers the glazing choice.
Free to use
Put this floater frame chart on your site
Writing about painting, framing, or selling canvas art? Embed our floater frame size chart for your readers. Copy the snippet below; it renders a clean table anywhere. The only ask: keep the small credit link to Austin Gallery.
Click inside the box, select all (Cmd-A or Ctrl-A), and copy. Includes one credit link back to this page.
How to hang a canvas without a frame
A gallery-wrapped canvas 1 1/2 inches deep with painted or neatly wrapped edges is designed to hang bare. Screw two D-rings into the back of the side stretcher bars, about a third of the way down, and hang them on two level hooks. CCI notes that two hooks make a painting easier to hang straight and keep level. Picture wire between the D-rings works on light canvases, but two hooks give a backup. Because an unframed canvas is more vulnerable, CCI suggests screwing a rigid backing, such as fluted plastic sheet, onto the back of the stretcher to protect the canvas from knocks behind.
If you stretch your own canvases, our canvas stretching guide covers wrapping the edges cleanly so they can be shown without a frame.
Exceptions most guides miss
- •Floater screws go into the stretcher; clips should not. Floaters are built around screws into the stretcher bars. CCI's conservation advice for traditional frames is the opposite: fix plates to the frame only. For a valuable painting, ask the framer to use a method that leaves the stretcher untouched.
- •Too-shallow floaters show the back. A 1 1/2-inch canvas in a 1-inch floater sticks out behind and looks unfinished from the side.
- •Canvas panels are not stretched canvas. A flat canvas board, about 1/8 inch thick, frames like a print in any standard frame; see our art board and canvas panel sizes.
- •Wet paint needs time. Do not glaze or tightly frame a freshly finished oil; let it dry fully first.
What framing a canvas costs
Ready-made floater frames in standard canvas sizes are the budget route. Custom floaters and traditional mouldings from a frame shop cost more and scale with size. Our custom framing cost guide gives typical US price ranges by size from published retailer pricing.
Frequently asked questions
What size floater frame do I need for my canvas?
Match the inside opening to the canvas, plus the reveal. For a visible gap of about 1/8 to 1/4 inch per side, order an opening 1/4 to 1/2 inch larger than the canvas in each direction. For depth, choose a frame at least as deep as the canvas and ideally 1/8 to 1/4 inch deeper: about 7/8 to 1 inch for a 3/4-inch canvas and 1 5/8 to 2 inches for a 1 1/2-inch gallery wrap.
How big is the gap in a floater frame?
Typically 1/8 to 1/4 inch on each side, which is why floater openings are sold 1/4 to 1/2 inch larger than the canvas in each direction. A 1/4-inch reveal per side is the most common look. A wider gap makes the shadow line more pronounced; a zero-gap floater fits flush around the canvas edge.
Should you put glass over an oil or acrylic painting?
Usually not. Oils and acrylics on canvas are normally framed without glazing because the paint film is meant to be seen bare, and glass adds glare. The exception is a valuable work in a risky spot. The Canadian Conservation Institute says that if glass or acrylic is used it must not touch the paint, and a spacer should hold it away from the surface.
How do you hang a canvas without a frame?
Screw two D-rings into the back of the stretcher bars, about a third of the way down from the top, and hang them on two level hooks. The Canadian Conservation Institute notes two hooks keep a painting straight and level. A gallery-wrapped canvas 1 1/2 inches deep with painted edges is made to hang this way. Adding a rigid backing board to the stretcher protects the back of the canvas.
Can you put a stretched canvas in a regular frame?
Yes, in a frame with a rabbet deep enough or with offset clips. A 3/4-inch canvas is usually deeper than a standard picture frame rabbet, so it stands proud of the back and is held in with offset clips screwed into the frame. The Canadian Conservation Institute says to screw retaining plates into the frame only, not the stretcher, and never to use nails.
How much does it cost to frame a canvas painting?
It depends on size and moulding. A ready-made floater frame for a common canvas size costs far less than custom framing, while a custom floater or traditional frame from a frame shop is priced by the united inch plus labor. Our custom framing cost guide breaks down typical US price ranges by size.
What is the difference between a floater frame and a regular frame?
A floater frame holds the canvas from behind, so the whole painted surface and its edges show, with a small gap between canvas and frame that makes the painting appear to float. A regular frame has a lip that overlaps the front edge of the artwork and holds it from the front, which covers a few millimeters of the painting.
Sources
- Custom Picture Frames: Floater frames explained
- Custom Picture Frames: How to frame a canvas
- Canadian Conservation Institute: Basic care of paintings
- Australian War Memorial: Conservation of oil paintings
Austin Gallery's framing notes are general guidance. For a valuable or historic painting, use a framer experienced with conservation framing. Austin Gallery may earn a commission from links on this page at no cost to you.
More gallery reference guides
Cite this guide
Writers, framers, designers and students are welcome to quote this page. If you use one number, use this one:
Choose a floater frame 1/8 to 1/4 inch deeper than the canvas, about 7/8 to 1 inch for a 3/4-inch canvas and 1 5/8 to 2 inches for a 1 1/2-inch gallery wrap, with an opening 1/4 to 1/2 inch larger than the canvas for the reveal.
Suggested citation:
Austin Gallery, "How to Frame a Canvas Painting: Floater Depths and Gaps," updated November 2026. https://www.austingallery.org/blog/how-to-frame-a-canvas-painting
More free charts: the Austin Gallery reference library.