Art Care Reference
Art Humidity and Temperature Guide: The 65 Percent Mold Line
Keep art at 40 to 60% relative humidity and 61 to 77°F (16 to 25°C), hold RH within about 5 points of its setpoint, and keep it below 65%, the level above which mold will grow. Steady matters more than the exact number.
By Travis Moher · Published November 17, 2026
Canvas, wood panel, paper and photographic gelatin are all hygroscopic: they take on and give off water with the air around them, and they swell and shrink as they do. Humidity damage almost never comes from one bad day. It comes from repeated swings, and from long stretches above the mold line. These are the published targets conservators use, by medium, and how to get close to them in a normal house.
Target RH and temperature by medium
| Medium | Relative humidity | Temperature | Main risk | Source |
|---|---|---|---|---|
| Oil on canvas | 40 to 60%, steady | 61 to 77°F (16 to 25°C) | Paint cracks when RH drops; canvas shrinks above 90% | CCAHA, CCI |
| Acrylic on canvas | 40 to 60% | 61 to 77°F (16 to 25°C) | Low sensitivity to RH swings | CCAHA, CCI |
| Panel paintings, gilding on wood | 40 to 60%, within 5 points | 61 to 77°F (16 to 25°C) | Wood moves; paint and gilding crack or lift | CCAHA, CCI |
| Works on paper on display | 30 to 60% | 64 to 72°F (18 to 22°C) | Cockling, distortion, mold, foxing | NEDCC |
| Photographs in storage | 30 to 50% | 55 to 61°F (13 to 16°C) | Gelatin sticks to glazing; mold | NEDCC |
| Color photographs, cold storage | 40 to 50% | 14 to 41°F (minus 10 to 5°C) | Dye fading slows sharply in the cold | NEDCC |
| Dye inkjet prints | Below 70% | Room temperature | Color bleed after short periods above 70% | IPI |
| Metals (special collections) | 0 to 30% | Room temperature | Corrosion | CCI |
Painting targets follow CCAHA's display assumptions (RH 40 to 60%, 16 to 25°C) and the CCI's sensitivity ratings. Paper and photograph figures are NEDCC's. Fahrenheit and Celsius conversions are rounded.
The 65 percent mold line
The Northern States Conservation Center puts it plainly: above 65% RH, mold will grow, and it grows faster as RH rises. For mixed collections it recommends a stable RH somewhere between 25% and 65%. That 65% figure is the line to watch at home, because a closed room in a humid summer or a bathroom after a shower crosses it easily.
Time above the line is what turns risk into damage. The Canadian Conservation Institute estimates visible mold on sensitive organic materials (starched or dirty paper and textiles, leather, parchment) at warm room temperatures after:
- •About 100 days at 70% RH
- •About 10 days at 80% RH
- •About 2 days at 90 to 100% RH
Clean paper, textiles and wood usually need about 80 to 85% RH before mold is likely at all, per the CCI. Dirt, old paste and sizing lower that bar, which is why an old print in a dusty frame molds first.
Safe fluctuation bands
The CCI's guideline for general museums is a 50% RH setpoint (or the historic annual average for the building) and 15 to 25°C. Its tightest everyday class, Class A, allows plus or minus 5% RH and plus or minus 2°C in the short term, with seasonal drift of up to 10% RH. Class B allows plus or minus 10% RH and plus or minus 5°C. Here is the CCI's damage estimate for each swing size, by object sensitivity:
| RH swing | Low sensitivity | Medium | High | Very high |
|---|---|---|---|---|
| Plus or minus 5% RH | None | None | None to tiny | None to small |
| Plus or minus 10% RH | None | None to tiny | None to small | Small to severe |
| Plus or minus 20% RH | None to tiny | None to small | Small to severe | Severe |
| Plus or minus 40% RH | Varies | Varies | Severe | Severe |
Our rule of thumb, taken from the CCI's Class A band: pick a setpoint and stay within 5 points of it. A house that sits at 45% all year is better for a painting than one that bounces between 35 and 60%, even though both averages look fine.
What humidity does to canvas, panel, paper and photos
- •Canvas. Tightly woven canvas shrinks above 90% RH. Old oil paint is rigid, and the CCI notes that for oil on canvas a swing to lower RH is far riskier than a swing to higher RH: the canvas and ground contract under a paint film that cannot follow, and it cracks. Acrylic paintings on canvas rate as low sensitivity.
- •Panel. Oil paint or gilding across a wide span of wood is in the CCI's higher-risk group. Wood swells and shrinks across the grain, and the paint layer on top lifts or cracks along those lines.
- •Paper. Paper cockles and distorts with each cycle, and sheets held tight at the edges can tear. Sustained damp brings mold and the brown spotting called foxing. Below 25% RH, the NSCC notes, paper and leather can turn brittle.
- •Photographs. Gelatin layers can soften and stick to glass or neighboring prints in high humidity. The Image Permanence Institute warns that dye inkjet prints can bleed after only short periods above 70% RH.
Home-practical steps
- •Put a hygrometer by the art. A small digital one on the same wall tells you more than the thermostat does. Watch the swings, not just the reading.
- •Humidify in winter. Heating cold air drops RH hard. The CCI notes that heating to 21°C (70°F) without humidifying can drop indoor RH to about 5% in parts of Canada.
- •Dehumidify or air condition in humid summers. The goal is keeping the room under 60% so it never reaches the 65% line.
- •Choose interior walls. Exterior walls run colder and can condense. Keep art off walls above radiators, fireplaces and heat vents.
- •Skip attics, basements and garages for storage. They have the widest swings in the house. See our guide to storing art.
- •Give frames air. Small bumpers on the bottom corners let air move behind the frame so the backing does not stay damp.
- •Seal the frame package. A well-backed frame slows moisture exchange, so the art feels the room's average instead of its spikes.
Light and humidity work together: damp, bright rooms fade and stain art faster than either alone. Pair this with our guide to protecting art from fading.
Exceptions and distinctions
- •Stable beats perfect. A painting that has lived for decades at 35% may be safer staying at 35% than being moved to 50%. The CCI allows the historic annual average of a building as the setpoint for exactly this reason.
- •Temperature mostly moves RH. Warm air holds more water. Water vapor capacity roughly doubles for each 10°C rise, so a room that warms up quickly sees its RH fall, and a room that cools sees it climb.
- •Temperature changes fast, objects change slowly. NEDCC notes that temperature equilibrates in hours, while humidity equilibration in an object can take days, weeks or months. Short spikes matter less than long trends.
- •Cool is good for longevity, cold is for storage. Lower temperatures slow chemical aging, which is why color photographs go to cold storage. Display rooms stay at people temperatures.
- •Bathrooms are their own case. Showers push RH past 65% daily. Our framed art in a bathroom guide covers what can hang there.
Free to use
Put this humidity chart on your site
Writing about art care, framing or home storage? Embed our humidity and temperature chart for your readers. Copy the snippet below. It renders a clean, responsive table anywhere. The only ask: keep the small credit link to Austin Gallery.
Click inside the box, select all (⌘A or Ctrl+A), and copy. Includes one credit link back to this page.
Frequently asked questions
What humidity is best for artwork?
40 to 60% relative humidity, held steady. CCAHA's exhibition guidance assumes RH of 40 to 60% and 16 to 25°C (61 to 77°F). The Canadian Conservation Institute uses a 50% RH setpoint for general museums.
At what humidity does mold grow on art?
Above 65% relative humidity, according to the Northern States Conservation Center, and faster as RH rises. The Canadian Conservation Institute estimates visible mold on sensitive organic materials after about 100 days at 70% RH, about 10 days at 80%, and about 2 days at 90 to 100%.
How much can humidity fluctuate without damaging art?
Plus or minus 5% RH is the tight museum band (CCI Class A), and CCI rates it as no risk for low and medium sensitivity objects. At plus or minus 10%, most objects are fine but the most sensitive ones can be damaged. Swings of plus or minus 20 to 40% cause severe damage to sensitive work.
What temperature should art be kept at?
Between about 61 and 77°F (16 to 25°C) for display, per CCAHA. NEDCC gives 68°F plus or minus 4°F (64 to 72°F) for paper in rooms people also use. Cooler is better for longevity, and steady is better than either.
Is low humidity bad for paintings?
Yes. The Canadian Conservation Institute notes that for rigid oil paint on canvas, a swing to lower RH is far riskier than a swing to higher RH, because the paint film can crack. Below 25% RH, materials such as paper and leather can become brittle.
What humidity should photographs be stored at?
30 to 50% RH at 55 to 61°F for photograph storage, according to NEDCC. Color photographs are best in cold storage at 14 to 41°F. Dye-based inkjet prints can bleed after short periods above 70% RH, per the Image Permanence Institute.
Does winter heating hurt art?
It can. Heating cold outdoor air lowers its relative humidity sharply. The Canadian Conservation Institute notes that heating to 21°C (70°F) in winter without humidifying can drop indoor RH to about 5% in parts of Canada. A room humidifier and a hygrometer near the art help.
Sources
- Canadian Conservation Institute, Agent of Deterioration: Incorrect Relative Humidity (setpoints, Class AA to D bands, fluctuation damage, mold timelines, winter heating)
- NEDCC Preservation Leaflet 2.1 (paper and photograph temperature and RH ranges)
- CCAHA, Light Exposure for Artifacts on Exhibition (RH 40 to 60% and 16 to 25°C display assumptions)
- Northern States Conservation Center, Relative Humidity and Temperature (65% mold threshold, 25 to 65% stable range)
- Image Permanence Institute, Display Precautions (dye inkjet bleed above 70% RH)
Austin Gallery's care notes are general guidance, not conservation treatment advice. For a valuable or irreplaceable piece, consult a professional conservator about your specific environment.
Cite this guide
Writers, framers, designers and students are welcome to quote this page. If you use one number, use this one:
Keep art at 40 to 60% relative humidity and 61 to 77°F (16 to 25°C), hold RH within about 5 points of its setpoint, and keep it below 65%, the level above which mold will grow.
Suggested citation:
Austin Gallery, "Art Humidity and Temperature Guide: The 65 Percent Mold Line," updated November 2026. https://www.austingallery.org/blog/art-humidity-and-temperature-guide
More free charts: the Austin Gallery reference library.